| Application: |
A seamless copper tube suitable for general plumbing and similar conveyance or fluids in domestic water service and distribution, solar heating and fire protection.
|
| Quality: |
A quality product mainly supplied in the “as drawn” temper in straight lengths which have been individually non-destructively tested. |
| Mechanical Properties: |
Tensile Strength 290 Mpa / min
Elongation min 3%
Hardness > 100VPN
|
| Temper: |
Hard Drawn. |
| Packaging: |
Bundled and Plastic wrapped. |
| Joining: |
These tubes are suitably connected by means of capillary solder fittings. |
| Bending: |
Not suitable for bending. Use with capillary fittings. |
Water Reticulation
|
Indicates the European recommended dimensions |
| Indicates other European dimensions |
| Indicates the Maksal Range |
Half hard tube with excellent bending qualities.
Recommended for use with capillary soldered fittings and compression fittings
above ground and with compression fittings below ground.
Back to top