Refrigeration Tubes

RC and RL Refrigeration Tubes

Nominal Size of Tube
(mm)		 Theoretical
Mass		 Maximum
Working Pressure		 Number of
Coils per
Standard
Pack 15.24m
OD "RL" "RC" "RL" "RC" "RL" "RC"
WT WT kg/m kg/m kpa kpa
3.18 0.76 0.051 21920 15
4.76   0.61   0.071   10590 15
6.35 0.51 0.61 0.098 0.098 12200 7720 10
7.94   0.61   0.125   6070 10
9.53 0.61 0.61 0.152 0.152 9580 5010 10
12.70 0.61 0.71 0.206 0.238 7100 4340 5
15.88 0.71 0.71 0.302 0.302 6580 3440 5
19.05 0.71 0.81 0.365 0.414 5460 3270 4
22.23 0.81 1.02 0.486 0.605 5330 3915 4
28.58 0.91   0.705   4640    
34.93 1.02   0.968   4256    
41.28 1.22   1.368   4290    
53.98 1.42   2.090   3820    
66.68 1.63   2.969   3540    
79.38 1.78   3.868   3240    
92.08 2.03   5.118   3190    
104.78 2.41   6.908   3330    

Refrigeration Tube is manufactured generally in accordance with ASTM B 280-88 and ASTM B 743-88 for use with refrigerant gases. All tubes are thoroughly degreased and tube ends are capped to prevent the ingress of moisture (coil ends are capped). Coils are separated by paper / plastic sheets supplied in cardboard cartons.

RC and RL Refrigeration Tubes (R410 Compatible)

Nominal Size of Tube
(mm)		 Theoretical
Mass		 Maximum
Working Pressure		 Number of
Coils per
Standard
Pack 15.24m
OD "RL" "RC" "RL" "RC" "RL" "RC"
WT WT kg/m kg/m kpa kpa "RL" "RC"
6.35   0.91   0.138   12 00   10
9.53 0.91 0.91 0.219 0.219 14 680 7 670 20 10
12.70 0.91 0.91 0.300 0.300 10 790 5 640 10 5
15.88 0.91 0.91 0.380 0.380 8 530 4 460 10 5
19.05 0.91 0.91 0.462 0.462 7 050 3 690 10 4
22.23 0.91   0.543   6 010   10  
22.23 1.22   0.718   8 150   10  
28.58 1.22   0.935   6 280   10  
34.93 1.22   1.152   5 100   6  

Capillary Tubes for Restrictor Application

Cap
Component
Number		 Standard Sizes Theoretical
Mass
kg/m
Outside
Diameter
(mm)		 Inside
Diameter
(mm)
026 1.93 0.66 0.023
031 2.06 0.79 0.025
032 2.08 0.81 0.026
050 2.54 1.27 0.034
055 2.85 1.40 0.043
068 3.18 1.73 0.050
091 4.00 2.30 0.075

Available in 30m and 250m bunch coils - open ends annealed or hard drawn. Manufactured to Specification ASTM B 360.